Broaching Insert, 2000™ - Sintered Alloy, TiN, Metric - Chamfer
- HSCO material with TiN coating.
- This Serie is the preferred selection for Normalized Keys.
- ISO 773
- DIN 6885
- BS 4235
- UNI 6604
- Comes with a specific Chamfer which avoids Burrs on the edges of the cut (see Detail section).
- Comes in standard tolerances H7 (Adjusted) and P9 (Tight).
- For other non-standard cuts, it is recommended to use the inserts of the series 2100.
In stock
SKU
MCIBRV2000M000000
Pictogram Icons
Cutting Menu
- The Broaching and slotting inserts are made of sintered steel alloy with 13% cobalt.
- After heat treatment, this material reaches a hardness of 72 HRC while maintaining high toughness and, therefore, high strength shocks.
- When all sides have been sharpened, the insert is covered with TIN to obtain greater wear resistance.
- The protruding shape of the inserts allows them to be sharpened many times.
- The inserts, identified by their code ending in "SM", perform a chamfer of 0.2 x 45° at the point of intersection between the hole and the walls of the broached slot, leaving the hole free of any Burr.
- This type of chamfering can only be performed for ISO, DIN, BS or UNI normalized Keys.
- REV Tools also manufactures special inserts at the request of customers.
Useful information about the product
| Manufacturer (Vendor Code): | REV Tools |
| System of measurement: | Metric |
Write Your Own Review
Related Products
